RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR NISSAN SKYLINE V36 2WD 4-DOOR SEDAN DRIVER'S SEAT 2081.855.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2081.855.2

NISSAN SKYLINE V36 2WD 4-DOOR SEDAN DRIVER'S SEAT

Model year: 2006-11-2014-04
Special notes: The seating position is approximately 10mm lower than the lowest position of the original seat (when using ST-JJ). The seat offset is approximately 5mm on the door side (the Recaro moves closer to the door). The forward sliding amount is approximately 20mm less than the original.
Notes / Interference information: For LX (including Ergomed series), LS, and LT, the recliner dial on the center console side must be replaced with a thin recliner dial (product number 1600090J). For SR-3, 4, and 5, the recliner dial on the center console side must be replaced with a thin recliner dial (product number 1600090J), and there is approximately 5 to 10mm interference between the seat cushion side and the center console. For SP-# and Racer, an SP-G offset adapter set (product number 1600094J) is required. Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. If there is any interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installation.
Position: New structure frame. One-position type.
Armrest: Cannot be installed
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / ErgomedC / ErgomedD / ErgomedE / ErgomedLD / ErgomedMV (IS-84 base) Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle Classic LX Pepita / Classic LX Spektrum Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle LX-F (IS-05 base)
LS / LS-# / LT-# Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle CS / CR / CG / Conformed
CSE
Pro Racer RMS RMS can be installed with the separately sold RMS side adapter Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS ・Stainless steel side adapter set for RCS SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-#, Racer requires the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 requires the separately sold SP-GN side adapter set . For PRO RACER(RACER) SP-G/A SP-# and Racer, you will need the separately sold SP-G offset adapter set (product number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W You will need to purchase the side adapter set (product number 1700000J) separately. SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F

(Note) This product cannot be installed on any seats other than those listed in the matching information below. 4-door (sedan) driver's seat frame. 2WD vehicle. Side airbag canceller included. Vehicles with personal driving position memory system require relocation of the unit inside the seat.

Images are for illustration purpose only. Actual product may vary.