RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR MAZDA AXELA BM5F BMEF BYEFP NORMAL ONE POSITION 2082.002.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2082.002.2

MAZDA AXELA BM5F BMEF BYEFP NORMAL ONE POSITION

Model year: 2013-11-2019-04
Special notes: The side airbag function built into the factory seat will be lost. For vehicles equipped with side airbags, the airbag warning light must be turned off. The seating position will be approximately 32mm higher than the lowest position of the factory seat height adjustment function (using a 13mm spacer). (When using ST-JJ). The handle offset of the Recaro seat is the same as the factory seat. The slide position will be 10mm shorter at the front and 30mm shorter at the rear compared to the factory. When installing on the passenger seat, the occupant detection sensor will not function when the Recaro seat is installed on the passenger seat, and the seat belt warning light will not be turned on. In addition, with some seats, the seat cushion and center console will interfere with each other at the front end of the slide rail.
Notes / Interference information: For the NEW Ortho and SPORT-JC series, the seat cushion and center console will interfere with each other by approximately 1-5mm at the front end of the slide rail. Applies to vehicles as of August 2014. Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. If there is any interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installation.
Position: New structure frame. One-position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 will require the separately sold SP-GN side adapter set . PRO RACER (RACER) SP-G/A You will need to purchase the side adapter set separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Not confirmed for 4WD vehicles. Compatibility with vehicles equipped with optional seat accessories not confirmed.

Images are for illustration purpose only. Actual product may vary.