RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR MAZDA ATENZA GJ2 GJE GJ5 SPORTS ONE POSITION 2082.003.2

$262.80 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL RIGHT SEAT
Product Number
2082.003.2
Compatible Car
MAZDA ATENZA GJ2 GJE GJ5 SPORTS ONE POSITION
Product Description
Model year: 2012-11-
Special notes: The side airbag function built into the factory seat will be lost. For vehicles with side airbags, the airbag warning light must be turned off. The seating position will be approximately 20mm higher when the adapter frame is installed compared to the lowest position of the factory seat's height adjustment function. When the adapter frame is not installed, the seating position will be 18mm lower (when using ST-JJ). The Recaro seat handle offset is 5mm closer to the door compared to the factory seat. The slide position is 30mm shorter at the front and 10mm shorter at the rear compared to the factory. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be turned on.
Notes / Interference information: Applies to vehicles as of July 2014. Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installing it. If there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installation.
Position: New structure frame. One position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to prepare the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . You will need to purchase the PRO RACER(RACER) SP-G/A side adapter set (product number 1700000J) separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
You will need to purchase the TS-G / RS-G / TS-W / RS-W side adapter set (product number 1700000J) separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame. Includes MAZDA6 from August 2019. Side airbag canceller included. Compatibility with vehicles equipped with optional items around the seats has not been confirmed.
Notes
Images are for illustration purpose only. Actual product may vary.