$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2082.004.1 |
| Compatible Car | MAZDA MAZDA 2 DJ3 DJ5 DJL |
| Product Description | Model year: 2019-09- Special notes: The side airbag function built into the factory seat will be lost. Vehicles equipped with side airbags will need to have the airbag warning light turned off. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will not be turned on. The seating position will be approximately 6mm higher when using the center position of the three-stage adjustment function compared to the lowest position of the factory seat height adjustment function (adjustable 13mm up and 13mm down). (When using New LX-F). Compared to the factory seat, the Recaro seat is approximately 6mm closer to the door. The slide position is 20mm shorter forward compared to the factory. Please carefully read the notes below for each seat. Notes / Interference information: For the IS-05 series SR-6, 7 (excluding 7F), 11 and AM19 series (STYLE, TREND, SPORT), the seat cushion and center console will interfere with each other by 5-10mm at the front end position of the slide rail. For the Sportster and Cross Sportster, the seat cushion and center console will interfere by 5-10 mm (passenger side) at the front end of the slide rail. For the old IS-84 LX (including Ergomed), LS, and LT, there is also about 1-5 mm of interference, so the recliner dial (triangle) on the center console side will need to be replaced with a thin recliner dial (product number 1600090J). For the RS-G and TS-G, the shoulder part will interfere with the B-pillar by about 1 mm (driver's side). For the SP-#, the matching is not possible because of the large interference with the B-pillar, but it can be installed with the SP-G offset adapter set (product number 1600094J), assuming that there will be about 3-5 mm of interference. For the RMS, adjust the position to the optimum position (front/rear height, left/right offset 0/5/10 mm) using the RMS side adapter sold separately. If there is interference with the interior, it can be mitigated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. Choose from 3 height settings (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle Classic LX Pepita / Classic LX Spektrum Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle LX-F (IS-05 base) LS / LS-# / LT-# Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle Pro Racer RMS Please install the RMS by adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter (product number 1700002J). If there is any interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent) RCS Please install the RCS by adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV You will need to purchase the TS-G / RS-G / TS-W / RS-W side adapter set SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. The Demio was changed to the Mazda 2 in September 2019. Side airbag canceller included. Compatibility with vehicles equipped with optional items around the seats has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
