$262.80 SGD
| /
Brand | RECARO |
Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
Product Number | 2082.004.2 |
Compatible Car | MAZDA CX-3 DK5 |
Product Description | Model year: 2015-02- Special notes: The side airbag function built into the factory seat will be lost. Vehicles equipped with side airbags will need to have the airbag warning light turned off. When a Recaro seat is installed on the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will not come on. The seating position is almost the same as when using the center position of the three-stage adjustment compared to the lowest position of the factory seat height adjustment function (adjustable 13mm up and 13mm down). (When using New LX-F). The seat lateral position is almost the same as the factory seat. The sliding position is 8mm longer at the front and 28mm shorter at the rear for the driver's seat and 44mm shorter at the front and 4mm longer at the rear for the passenger seat compared to the factory. Please carefully read the notes below for each seat. Notes / Interference information: For the IS-05 series SR-6, 7 (excluding 7F), 11, AM19 series (STYLE, TREND, SPORT), and Orthoped, the seat surface and center console will interfere 5-10 mm at the front end of the slide rail. For the Sportster, the seat surface and center console will interfere 1-5 mm (passenger side) at the front end of the slide rail. For the IS-84 series old LX (including Ergomed series), LS, and LT, there is approximately 1-5 mm interference, so the recliner dial (triangle) on the center console side must be replaced with a thin recliner dial (product number 1600090J). For the SP-#, an SP-G offset adapter set (product number 1600094J) is required. For the RMS, please adjust the position to the optimum position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RMS side adapter before installation. If there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. Choose from 3 height settings (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle Classic LX Pepita / Classic LX Spektrum Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle LX-F (IS-05 base) LS / LS-# / LT-# Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle Pro Racer RMS Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter (part number 1700002J). If there is any interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types. ・RCS side adapter (part number 1700003J) ・RCS stainless steel side adapter set (part number 1700004J) SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set (part number 1600094J). AM19 TREND-J/JJ/JC AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with vehicles equipped with optional seat accessories has not been confirmed. |
Notes | Images are for illustration purpose only. Actual product may vary. |