$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2082.006.2 |
| Compatible Car | MAZDA CX-5 KFE KF2 KF5 |
| Product Description | Model year: 2017-02- Special notes: The side airbag function built into the factory seat will be lost. Vehicles equipped with side airbags will require the airbag warning light to be turned off. The seating position is 10mm higher when using the center position of the Recaro's three-stage adjustment compared to the lowest position of the factory seat height adjustment function (adjustable 13mm up and 13mm down). (When using the New LX-F). The steering wheel offset of the Recaro is 8mm closer to the door. The slide position is approximately 15mm shorter at the front and 25mm shorter at the rear compared to the factory. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be illuminated. Notes / Interference information: The console and seat cushion will interfere with each other when the seat slide is in the forward position. SR-6, 7, 11, TREND, STYLE, SPORT: approx. 10mm, Sportster, SR-7F, LX-F, old LX, ERGOMED series: approx. 5-7mm, Cross Sportster: weak interference. For RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RCS side adapter before installation. Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: Not compatible Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with vehicles equipped with optional seat accessories has not been confirmed. (We have provided this information for reference only, as some dealers have installed genuine optional seat heaters in vehicles with seat heaters, and the remaining genuine seat heaters are still operational even when either the driver's or passenger's seat is installed. For details, please contact a dealer that is familiar with this vehicle.) |
| Notes | Images are for illustration purpose only. Actual product may vary. |
