RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR MAZDA MPV LY3P PASSENGER SEAT 2082.129.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2082.129.1

MAZDA MPV LY3P PASSENGER SEAT

Model year: 2006-02-2016-03
Special notes: The seating position is almost the same as the genuine seat (when using ST-JJ center hole). Seat offset is about 20mm on the door side (Recaro moves closer to the door side). The forward slide amount is about 35mm less than the genuine seat. When installing the armrest, it may interfere with the belt buckle or center table depending on the angle of use.
Notes / Interference information: The seating position is higher for CS, CSE, CT, and C-clutch because a spacer is used. For RS/TS-# series, the steering wheel offset can be adjusted in 5mm increments from 5mm to a maximum of 15mm by using the RS/TS-G offset adapter set (product number 1700001J). (When installing, please consult your dealer regarding interference with the console side (shift, etc.). For RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) with the separately sold RMS side adapter before installing. Also, if there is any interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.)
Armrest: Can be installed for the right hand of the left seat, and for the left hand of the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
CT
C-Classic
Pro Racer RMS RMS can be installed with the separately sold RMS side adapter (product number 1700002J). Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS ・Stainless steel side adapter set for RCS SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / Early SR-2
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set [Offset priority] Offset adapter set for RS/TS-G The handle offset can be adjusted to 5/10/15mm left and right. (The seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Passenger seat frame. No side airbag. Compatibility with cold weather models and vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.