RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR MITSUBISHI EK WAGON H80 NO ELECTRIC SLIDING DOOR ON THE LEFT REAR SEAT FOR THE DRIVER'S SEAT 2083.126.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2083.126.2

MITSUBISHI EK WAGON H80 NO ELECTRIC SLIDING DOOR ON THE LEFT REAR SEAT FOR THE DRIVER'S SEAT

Model year: 2001-10-2006-08
Special notes: The seating position will be 10mm lower than the lowest position of the genuine seat (when using ST-JJ center hole).
Notes / Interference information: The seating position will be higher by the amount of the spacer used for CS and CSE. For SR-1 and 2, the shoulder part will interfere with the B-pillar by 5 to 10mm. For SP-# and Racer, the SP-G offset adapter set (product number 1600094J) is required. For Trend-J, JJ, JC, D, and DC, the backrest side and door armrest will interfere by 5 to 10mm. For RMS, please adjust to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RCS side adapter.
Position: New structure frame. 3 heights can be selected (For some car models, the legs of the slide rail need to be cut depending on the installation position, so please do a trial fit before installation.)
Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
Pro Racer RMS RMS can be installed with the separately sold RMS side adapter . Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS ・Stainless steel side adapter set for RCS SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / Early SR-2
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . For PRO RACER(RACER) SP-G/A SP-# and Racer, you will need the separately sold SP-G Offset Adapter Set (Part number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold Side Adapter Set (Part number 1700000J). SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Vehicles other than those with an electric sliding door (rear left side), driver's seat frame (right seat)

Images are for illustration purpose only. Actual product may vary.