$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2085.001.2 |
| Compatible Car | HONDA N-BOX JF1 JF2 |
| Product Description | Model year: 2011-12-2017-08 Special notes: The bench seat function of the front seats will be lost. The side airbag function built into the factory seat will be lost. Vehicles with side airbags will need to have the airbag warning light turned off. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will not function and the seat belt warning light will not be turned on. The seating position will be about 15mm lower than the factory seat when using the top position of the three-stage adjustment function of the base frame. (The base frame's three-stage adjustment function can be adjusted further down by 13mm in the middle position, and similarly, it can be adjusted down by 26mm in the bottom position). (When using ST-JJ). The handle offset of the Recaro seat is the same as the factory seat, and the forward sliding amount is reduced by about 20mm compared to the factory seat. When installed in a 4WD vehicle, the heater rear duct under the seat and the base frame will slightly interfere with each other. Notes / Interference information: For AM19 (TREND, SPORT), the backrest and door interfere with each other by about 5mm. Please install the RMS after adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter. If there is any interference with the interior, it can be alleviated by adjustment. Please install the RCS after adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. English: Choose from 3 heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position, so please test fit before installation.) Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS For the RMS, please adjust to the optimal position (front/back height, left/right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. *Please choose from the following two types.・Side adapter for RCS AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV You will need to purchase the TS-G / RS-G / TS-W / RS-W side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. For 2WD and 4WD vehicles. *Cannot be installed on N-BOX Slash. Compatible with vehicles with i-side airbags. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
