RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR HONDA VEZEL RU1 RU2 RU3 RU4 2085.004.2

$262.80 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL RIGHT SEAT
Product Number
2085.004.2
Compatible Car
HONDA VEZEL RU1 RU2 RU3 RU4
Product Description
Model year: 2013-12-
Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will not function and the seat belt warning light will not be turned on. The seating position is almost the same as the lowest position of the factory seat height adjustment function using a spacer, and is about 50 mm lower than the highest position of the factory seat height adjustment function. (When using ST-JJ). *If no spacer is used, it will be 12 mm lower than the lowest position. The steering wheel offset of the Recaro seat is closer to the center than the factory seat (the steering wheel will be in the center position). The forward sliding amount is reduced by about 20 mm compared to the factory seat.
Notes / Interference information: Please adjust the RMS to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the RMS side adapter sold separately. If there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installation.
Position: New structure frame. One position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to prepare the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . You will need to purchase the PRO RACER(RACER) SP-G/A side adapter set (product number 1700000J) separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
You will need to purchase the TS-G / RS-G / TS-W / RS-W side adapter set (product number 1700000J) separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. For 2WD and 4WD vehicles. Compatible with vehicles equipped with i-side airbags. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed.
Notes
Images are for illustration purpose only. Actual product may vary.