$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2085.005.2 |
| Compatible Car | HONDA N-WGN JH1 JH2 |
| Product Description | Model year: 2013-11-2019-07 Special notes: The bench seat function of the front seats will be lost. The side airbag function built into the factory seat will be lost. Vehicles with side airbags will need to have the airbag warning light turned off. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will not function and the seat belt warning light will not be turned on. The seating position is approximately 15mm lower than the lowest position of the factory seat height adjustment function, and approximately 45mm lower than the highest position of the factory seat height adjustment function. (New LX-F, when using a 13mm spacer). The steering wheel offset of the Recaro seat is closer to the center than the factory seat (the steering wheel will be in the center position). The forward sliding amount is approximately 10mm less than the factory seat. Notes / Interference information: For the AM19 series (STYLE, TREND, SPORT), the side of the backrest and the door armrest interfere with each other by about 5-10mm. For ORTHOPAD with a remote control on the side, the front end of the slide position will interfere with the console by about 5 mm. SP-# requires the SP-G offset adapter set (product number 1600094J). For RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RCS side adapter before installation. Position: New structure frame. One-position type. Armrest: Can be installed on the right hand side of the left seat or the left hand side of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Compatible with vehicles with i-side airbags. Sports frame. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
