$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2085.019.1 |
| Compatible Car | HONDA FREED FREED SPIKE GB3 4 GP3 |
| Product Description | Model year: 2008-05-2016-09 Special notes: When installed on the driver's seat of a vehicle with an i-side airbag, the side airbag built into the factory seat will no longer function. For vehicles with side airbags, the airbag warning light must be turned off. The seating position is almost the same as the lowest position of the factory seat (when using the ST-JJ center hole). The forward sliding amount is reduced by about 20 mm compared to the factory. The seat offset is about 10 mm toward the door (the Recaro moves toward the door). Notes / Interference information: For SR1, 2, 3, 4, 5, 6, 7, and 11, when sliding the seat backwards and reclining backwards, the shoulder support will interfere with the assist grip fixed to the B-pillar. For CS, CSE, CT, and C-Cruise, the seating position will be higher by the amount of the spacer because a spacer is used. For RS/TS-# series, the offset of the handlebars can be adjusted in 5mm increments from 5mm to a maximum of 15mm by using the offset adapter set for RS/TS-G (product number 1700001J). (When installing, please consult with your dealer regarding interference with the console side (shift, etc.).) For RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before mounting. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before mounting. Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE CT C-Classic Pro Racer RMS RMS can be installed with the separately sold RMS side adapter (product number 1700002J). Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Rally Special / First generation SR / SR-2 early model AM19 TREND-J/JJ/JC AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / For TS-W / RS-W RS/TS-# series, please choose from two types: the side adapter set or the offset adapter set for RS/TS-G, both sold separately. [Seating position priority] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Includes hybrids (HVs). Only compatible with the driver's seat of vehicles without i-side airbags and vehicles with i-side airbags. Side airbag canceller included. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
