RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR HONDA CR-Z ZF1 ZF2 2085.020.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2085.020.1

HONDA CR-Z ZF1 ZF2

Model year: 2010-02-2017-01
Special notes: When installed on the driver's seat of a vehicle with an i-side airbag, the side airbag function built into the original seat will be lost. For vehicles with side airbags, the airbag warning light must be turned off. The seating position is almost the same as the lowest position of the original seat. (When using ST-JJ). Seat offset is approximately 10mm on the door side (Recaro moves closer to the door).
Notes / Interference information: CS, CSE, CT, and C-class seats use a spacer, so the seating position will be higher by the amount of the spacer. If you are more concerned about the steering wheel offset than the seating height, the RS/TS-# series can adjust the steering wheel offset in 5mm increments from 5mm to a maximum of 15mm by using the RS/TS-G offset adapter set (product number 1700001J). (When installing, please consult your dealer regarding interference with the console side (shift, etc.).) Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installing. Also, if there is interference with the interior, this can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. One-position type.
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / ErgomedC / ErgomedD / ErgomedE / ErgomedLD / ErgomedMV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
CT
C-Classic
Pro Racer RMS RMS is an optional RMS side adapter Please adjust the RMS to the optimal position (front-rear height, left-right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / SR-2 early model
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). PRO RACER (RACER) SP-G/A side adapter set (product number 1700000J) must be purchased separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set [Offset priority] Offset adapter set for RS/TS-G The handle offset can be adjusted to 5/10/15mm left and right. (Seating position is raised by +5mm.) SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Only compatible with the driver's seat of vehicles without i-side airbags and vehicles with i-side airbags. Side airbag canceller included.

Images are for illustration purpose only. Actual product may vary.