$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2085.022.1 |
| Compatible Car | HONDA AIRWAVE GJ1 2 |
| Product Description | Model year: 2005-04-2010-08 Special notes: The seating position is a few mm lower than the lowest position of the original seat. The seat offset is about 15 mm on the door side (the Recaro seat moves closer to the door). Notes / Interference information: For CS and CSE, the seating position will be higher due to the removal of the recliner cover on the center console side and the use of a spacer. For SR-3, 4, 5, Sport-J, JJ, JC, D, and DC, the backrest side interferes with the door armrest and center console by a few mm. For SR-1 and 2, the backrest side interferes with the door armrest and center console by a few mm, and the shoulder part interferes with the B-pillar by about 5 to 10 mm. For SP-#, the SP-G offset adapter set (product number 1600094J) is required. For Trend-J, JJ, JC, D, and DC, the backrest side interferes with the door armrest and center console by about 5 to 10 mm. For RS/TS-# series, the offset of the handlebars can be adjusted in 5mm increments from 5mm to a maximum of 15mm by using the offset adapter set for RS/TS-G (product number 1700001J). (When installing, please consult with your dealer regarding interference with the console side (shift, etc.).) For RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before mounting. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before mounting. Position: New structure frame. One-position type. Armrest: Cannot be installed Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / ErgomedC / ErgomedD / ErgomedE / ErgomedLD / ErgomedMV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle CSE Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle Pro Racer RMS For the RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adaptor RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. *Please choose from the following two types.・Side adapter for RCS Rally Special / First generation SR / Early SR-2 Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
