$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2085.077.2 |
| Compatible Car | HONDA LIFE LIFE DUNK THAT JB1 2 3 4 JD1 2 |
| Product Description | Model year: 1998-10-2003-08 Special notes: The seating position is almost the same as the genuine seat (when using the ST-JJ center hole). If installed on the left and right, it will be difficult to pull the handbrake. Notes / Interference information: For SR-3, 4, 5, and New A-8, the backrest side and door armrest interfere by about 10 to 15 mm, the shoulder part and B-pillar interfere by about 5 to 10 mm, and the seat cushion side and door interfere by about 5 to 10 mm. For New Ortho, the seat cushion side and door interfere by about 5 to 10 mm. For A-8, the shoulder part and B-pillar interfere by about 5 to 10 mm. For SP-# and Racer, the shoulder part and B-pillar interfere by about 5 to 10 mm, and the SP-G offset adapter set (product number 1600094J) is required. For Style-J, JJ, JC, D, and DC, the backrest width adjustment should be adjusted to the narrowest setting before installation. For Sport-J, JJ, JC, D, and DC, there is approximately 10-15mm interference between the backrest side and the door armrest. For RMS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. If there is interference with the interior, this can be alleviated by adjustment. For RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installation. Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: Not compatible Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold side adapter set (part number 1700000J). SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. AT vehicles only |
| Notes | Images are for illustration purpose only. Actual product may vary. |
