$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2085.173.2 |
| Compatible Car | HONDA STEPWGN RF3 4 5 6 7 8 RF3.4 FITS CARS WITH 7-DIGIT CHASSIS NUMBERS AFTER 1400000. |
| Product Description | Model year: 2003-06-2005-04 Special notes: When installed on the driver's seat of a vehicle with an i-side airbag, the side airbag function built into the original seat will be lost. For vehicles with side airbags, the airbag warning light must be turned off. The seating position will be about 15mm lower than the lowest position of the original seat (when using the ST-JJ center hole). The original seat rotation function will be lost. If the original seat is removed, the shift lock function will be activated and shift operation will be impossible, so if you are installing a Recaro, you will need to cancel it using the shift lock canceller included with the base frame. Notes / Interference information: The seating position will be higher for CS, CSE, CT, and C-clutch because they use spacers. For RMS, please adjust the position to the optimum position (front/rear height, left/right offset 0/5/10mm) using the RMS side adapter sold separately. If there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Can be installed for the right hand of the left seat, and for the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE CT C-Classic Pro Racer RMS RMS can be installed with the separately sold RMS side adapter (product number 1700002J). Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Rally Special / First generation SR / Early SR-2 Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV You will need to purchase the TS-G / RS-G / TS-W / RS-W side adapter set (product number 1700000J) separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Only compatible with the driver's seat of vehicles without i-side airbags and vehicles with i-side airbags. Side airbag canceller included. Includes vehicles with rotation function. For RF3.4, it is compatible with vehicles with 7-digit chassis numbers after 1400000. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
