$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2085.175.2 |
| Compatible Car | HONDA STEP WAGON RK1 2 5 6 |
| Product Description | Model year: 2009-10-2015-03 Special notes: When installed on the driver's seat of a vehicle with an i-side airbag, the side airbag built into the factory seat will no longer function. For vehicles with side airbags, the airbag warning light must be turned off. The seating position is almost the same as the lowest position of the factory seat (when using the ST-JJ center hole). The forward sliding amount is reduced by about 20 mm compared to the factory. Notes / Interference information: SR-1 and 2 have about 10 to 15 mm interference between the shoulder and B-pillar. CS and CSE use a spacer, so the seating position is higher by the amount of the spacer. For RMS, please adjust to the optimal position (front-rear height, left-right offset 0/5/10 mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust to the optimal position (front-rear height, left-right offset 0/5/10 mm) using the separately sold RCS side adapter before installation. Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Can be installed for the right hand of the left seat, and for the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE CT C-Classic Pro Racer RMS RMS can be installed with the separately sold RMS side adapter (product number 1700002J). Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Rally Special / First generation SR / Early model SR-2 Late model A-8 Early model A-8 SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold side adapter set for SP-GN AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Only compatible with the driver's seat of vehicles without i-side airbags or with i-side airbags. Side airbag canceller included. SPADA included. However, compatibility with vehicles equipped with optional items such as navigation units has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
