$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2085.244.1 |
| Compatible Car | HONDA STREAM RN7 9 |
| Product Description | Model year: 2006-07-2014-05 Special notes: When installed on the driver's seat of a vehicle with an i-side airbag, the side airbag function built into the original seat will be lost. For vehicles with side airbags, the airbag warning light must be turned off. The seating position is almost the same as the lowest position of the original seat (when using the ST-JJ upper holes). The forward sliding amount is reduced by about 20 mm compared to the original. If the seat is installed at the lowest position, the leg behind the center console must be cut. Notes / Interference information: SP-# requires the SP-G offset adapter set (product number 1600094J). CS, CSE, CT, and C-class seats use spacers, so the seating position will be higher by the amount of the spacer. For RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the RMS side adapter sold separately. If there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE CT C-Classic Pro Racer RMS RMS can be installed with the separately sold RMS side adapter (product number 1700002J). Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold Side Adapter Set (Part number 1700000J). SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Only compatible with the driver's seat of vehicles without i-side airbags or with i-side airbags. Side airbag canceller included. 4WD vehicles. Compatibility with vehicles equipped with optional items such as navigation units has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
