RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR HONDA CIVIC EK2 3 4 9 ONE POSITION FRAME 2085.527.1

$268.06 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL LEFT SEAT
Product Number
2085.527.1
Compatible Car
HONDA CIVIC EK2 3 4 9 ONE POSITION FRAME
Product Description
Model year: 1995-09-2000-09
Special notes: The seating position is 22mm lower than the lowest position of the genuine seat when the 13mm spacer (6mm + 7mm) is inserted. (When using ST-JJ) *When using in competition with the spacer removed, the seating position is 35mm lower than the lowest position of the genuine seat. Steering wheel offset door side approx. 15mm (Recaro moves closer to the door side).
Notes / Interference information: For RS/TS-# series, the steering wheel offset can be adjusted in 5mm increments from 5mm to a maximum of 15mm using the RS/TS-G offset adapter set (product number 1700001J). (When installing, please consult your dealer regarding interference with the console side (shift, etc.)) For RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, if there is any interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. Position: New structure frame. One-position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / SR-2 early model
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). PRO RACER (RACER) SP-G/A side adapter set (product number 1700000J) must be purchased separately. AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set (product number 1700000J) [Offset priority] Offset adapter set for RS/TS-G (product number 1700001J) The handlebar offset can be adjusted to 5/10/15mm left and right. (The seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame. FF vehicle.
Notes
Images are for illustration purpose only. Actual product may vary.