RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR HONDA CIVIC EG3 4 6 7 8 9 EJ1 EXCLUDING EJ7 ONE POSITION FRAME 2085.528.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2085.528.2

HONDA CIVIC EG3 4 6 7 8 9 EJ1 EXCLUDING EJ7 ONE POSITION FRAME

Model year: 1991-09-1995-08
Special notes: The seating position is lowered by approximately 25 mm. The handlebar offset is approximately 10 mm on the door side (the Recaro is closer to the door side).
Precautions / Interference information: For RS/TS-# series, the handlebar offset can be adjusted in 5 mm increments from 5 mm to a maximum of 15 mm by using the RS/TS-G offset adapter set (product number 1700001J). (Please consult your dealer regarding interference with the console side (shift, etc.) when installing.) For RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RMS side adapter before installing. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. One position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be alleviated by adjustment. RCS RCS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types. ・Side adapter for RCS ・Stainless steel side adapter set for RCS Late model SR-2 / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / Early model SR-2
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . You will need to purchase the PRO RACER (RACER) SP-G/A side adapter set (product number 1700000J) separately. AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types: the side adapter set or the offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set (product number 1700000J) [Offset priority] Offset adapter set for RS/TS-G (product number 1700001J) The handlebar offset can be adjusted to 5/10/15mm left and right. (Seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame. FF vehicle.

Images are for illustration purpose only. Actual product may vary.