$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2085.529.2 |
| Compatible Car | HONDA CIVIC EU1 3 EP3 |
| Product Description | Model year: 2000-09-2005-08 Special notes: The seating position is 5mm lower than the factory seat (when using ST-JJ center hole). The seat offset is 15mm toward the console (Recaro moves closer to the center console). The forward sliding amount is 70mm less than the factory, and 50mm more backward sliding amount is 50mm more than the factory. Notes / Interference information: D, DS, DSE are installed with the backrest width adjustment set to the narrowest. SR-3, 4, 5, Sport-J, JJ, JC, D, DC have a few mm of interference between the backrest side and the door armrest. SR-1, 2 have a few mm of interference between the backrest side and the door armrest, and a few mm of interference between the shoulder part and the B-pillar. SP-#, Racer have a few mm of interference between the shoulder part and the B-pillar. Trend-J, JJ, JC, D, DC have about 5-10mm of interference between the backrest side and the door armrest. Please install the RMS after adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter. If there is any interference with the interior, it can be alleviated by adjustment. Please install the RCS after adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Can be installed for the right hand of the left seat and the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE D / DH / DV DS / DS-H / DS-V / ES-V/DSE Pro Racer RMS Please install the RMS by adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter (product number 1700002J). If there is any interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent) RCS Please install the RCS by adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Rally Special / First generation SR / Early SR-2 Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV You will need to purchase the TS-G / RS-G / TS-W / RS-W side adapter set (product number 1700000J) separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. (Excluding Ferio) No side airbags, 2WD vehicles |
| Notes | Images are for illustration purpose only. Actual product may vary. |
