$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2085.831.1 |
| Compatible Car | HONDA ACCORD CL7 8 9 CM2 3 |
| Product Description | Model year: 2002-10-2008-11 Special notes: The seating position is almost the same as the lowest position of the genuine seat (when using ST-JJ center hole). Notes / Interference information: SR-1, 2: Shoulder and B-pillar interfere by approx. 15-20mm. SP-#, Racer: Shoulder and B-pillar interfere by approx. 15-20mm, SP-G offset adapter set (product number 1600094J) is required. TS-#, RS-#: Shoulder and B-pillar interfere by approx. 5mm. RMS: Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) with the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. RCS: Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) with the separately sold RCS side adapter before installation. Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Cannot be installed Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / ErgomedC / ErgomedD / ErgomedE / ErgomedLD / ErgomedMV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE CT C-Classic D / DH / DV DS / DS-H / DS-V / ES-V/DSE Pro Racer RMS Please install the RMS by adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter (product number 1700002J). If there is any interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent) RCS Please install the RCS by adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Rally Special / First generation SR / Early SR-2 Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold Side Adapter Set (Part number 1700000J). SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. i-Cars without side airbags |
| Notes | Images are for illustration purpose only. Actual product may vary. |
