$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2085.833.2 |
| Compatible Car | HONDA CIVIC FD1 2 3 |
| Product Description | Model year: 2005-09-2012-06 Special notes: The seating position is almost the same as the OEM seat (when using ST-JJ center hole). Seat offset door side approx. 20mm (Recaro moves closer to the door side). Slide amount forward is reduced approx. 20mm compared to OEM. Notes / Interference information: CS, CSE use a spacer, so the seating position is higher by the amount of the spacer. SR-3, 4, 5: Backrest side and door armrest interfere by a few mm. SR-1, 2: Backrest side and door armrest interfere by a few mm, shoulder part and B-pillar interfere by a few mm. SP-#: Shoulder part and B-pillar interfere by a few mm. Trend-J, JJ, JC, D, DC: Backrest side and door armrest interfere by approx. 5-10mm. Sport-J, JJ, JC, D, DC: Backrest side and door armrest interfere by a few mm. For RS/TS-# series, the offset of the handlebars can be adjusted in 5mm increments from 5mm to a maximum of 15mm by using the offset adapter set for RS/TS-G (product number 1700001J). (When installing, please consult with your dealer regarding interference with the console side (shift, etc.).) For RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before mounting. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before mounting. Position: New structure frame. English: Choose from 3 height levels (For some car models, the legs of the slide rail may need to be cut depending on the installation position, so please test fit before installation.) Armrest: Cannot be installed Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE Pro Racer RMS For the RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter Rally Special / First generation SR / SR-2 early model Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G, sold separately. [Priority on seating position] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. (Excluding Ferio) No side airbags. Compatibility with vehicles equipped with optional items such as navigation units has not been confirmed. Except for Type R. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
