$269.00 SGD $28,600.00 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2086.001.2 |
| Compatible Car | SUBARU LEVORG VM |
| Product Description | Model year: 2014-06-2020-10 Special notes: The side airbag function built into the factory seat will be lost. Vehicles equipped with side airbags will require the airbag warning light to be turned off. The seating position is approximately 13mm higher when using the upper position of the Recaro's three-stage adjustment compared to the lowest position of the factory seat height adjustment function, approximately the same when using the center position, and approximately 13mm lower when using the lower position. (When using ST-JJ). The handle offset of the Recaro seat is 5mm closer to the door than the factory seat. The slide position is 20mm shorter forward than the factory. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be turned on. Notes / Interference information: For SP-# and Racer, the shoulder part may interfere with the B-pillar due to individual differences. For the RMS, please adjust it to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter before installing it. Also, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. For the old LX (including Ergomed series), there is interference with the console, so you need to remove the recliner dial on the center console side and replace it with a rubber cap (product number 1600091J). Please remove the round recliner dial of the LS, etc. Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: Not compatible Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. *All seats listed can be installed only on cars with electric parking brakes. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
