$282.30 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2086.003.2 |
| Compatible Car | SUBARU LEVORG VM SPORTS FRAME |
| Product Description | Model year: 2014-06-2020-10 Special notes: The side airbag function built into the factory seat will be lost. For vehicles equipped with side airbags, the airbag warning light must be turned off. The seating position will be approximately 12 mm higher when the adapter frame is installed compared to the lowest position of the factory seat height adjustment function. It will be 26 mm lower when the adapter frame is not installed (when using ST-JJ). The Recaro seat handle offset is 5 mm closer to the door than the factory seat. The slide position is 20 mm shorter forward than the factory. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be turned on. Notes / Interference information: When installing the SP-# or Racer in the passenger seat, the shoulder part will interfere with the B-pillar, so the SP-G offset adapter set (product number 1600094J) is required. For the New Orthoped and SPORT-JC series, the seat surface and center console will interfere by a few millimeters at the front end of the slide rail. For the RMS, adjust the seat to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. If there is any interference with the interior, it can be alleviated by adjustment. For the RCS, adjust the seat to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installation. For the old LX (including Ergomed series), there is interference with the console, so remove the recliner dial on the center console side and replace it with a rubber cap (product number 1600091J). Remove the round recliner dial. For the RMS, adjust the seat to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. If there is any interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installation. Position: New structure frame. One position type. Armrest: Not mountable Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold Side Adapter Set (Part number 1700000J). SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame. Side airbag canceller included. *All seats listed can be installed on vehicles with electric parking brakes. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
