$282.30 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2086.003.2 |
| Compatible Car | SUBARU IMPREZA INCLUDING XV GP2.3.6.7 GJ2.3.6.7 GPE SPORTS FRAME |
| Product Description | Model year: 2011-12-2016-10 Special notes: The side airbag function built into the factory seat will be lost. For vehicles with side airbags, the airbag warning light must be turned off. For XV Hybrid vehicles, the puncture repair kit under the passenger seat must be relocated. The seating position will be approximately 12 mm higher when the adapter frame is installed compared to the lowest position of the factory seat height adjustment function. When the adapter frame is not installed, the seating position will be 26 mm lower (when using ST-JJ). The Recaro seat handle offset is 5 mm closer to the door than the factory seat. The slide position is 20 mm shorter forward than the factory. When a Recaro seat is installed on the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be turned on. Notes / Interference information: When installing an SP-# or Racer on the passenger seat, the shoulder part will interfere with the B-pillar, so an SP-G offset adapter set (product number 1600094J) is required. For the New Orthoped and SPORT-JC series, the seat surface and center console will interfere by a few mm at the front end of the slide rail. For the old LX (including Ergomed series), the recliner dial on the center console must be removed and replaced with a rubber cap (product number 1600091J) due to interference with the console. Please remove the round recliner dials such as the LS. For the RMS, please adjust the position to the optimum position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RMS side adapter. Also, if there is interference with the interior, it can be alleviated by adjustment. For the RCS, please adjust the position to the optimum position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RCS side adapter. Position: New structure frame. One-position type. Armrest: Not mountable Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold Side Adapter Set (Part number 1700000J). SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame. For Sports, G4, and XV (including XV Hybrid. However, the puncture repair kit under the passenger seat must be relocated). Side airbag canceller included. The sports frame will be seated about 13 mm lower than the lowest position of the frame with three-stage adjustment function (part number 2086.001.1/2) if the included side adapter frame is not used. *All seats listed can be installed on vehicles with electric parking brakes. For vehicles with manual parking brakes, SR series seats other than SR-7F cannot be installed because the brake lever and seat cushion interfere with each other when using the included adapter frame. If the included adapter frame is not used, SR-6/7/11 can be installed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
