RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR SUBARU IMPREZA INCLUDING XV GDA GDB GD2 3 9 GGA GG2 3 9 SPORTS FRAME WITHOUT BUCKLE PRETENSIONER 2086.088.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2086.088.1

SUBARU IMPREZA INCLUDING XV GDA GDB GD2 3 9 GGA GG2 3 9 SPORTS FRAME WITHOUT BUCKLE PRETENSIONER

Model year: 2000-08-2007-05
Special notes: The side airbag function built into the factory seat will be lost. For vehicles equipped with side airbags, the airbag warning light must be turned off. The seating position will be 8mm higher when the adapter frame is installed compared to the lowest position of the factory seat height adjustment function. When the adapter frame is not installed, the seat position will be 30mm lower. The seat offset is 10mm toward the door (the Recaro moves closer to the door). The rearward sliding amount is reduced by 10mm compared to the factory.
Notes / Interference information: For SR-3, 4, and 5, the shoulder part interferes with the B-pillar by 5 to 10mm. For SR-1 and 2, the backrest side interferes with the door armrest by several mm, and the shoulder part interferes with the B-pillar by 20 to 30mm. For SP-# and Racer, the SP-G offset adapter set (product number 1600094J) is required. The shoulder part interferes with the B-pillar by 5 to 10mm. For the SP-#N, the shoulder section and B-pillar interfere by approximately 5 to 15 mm. For the RS/TS-# series, an offset adapter set for RS/TS-G (product number 1700001J) is required. For the RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RMS side adapter before installation. If there is interference with the interior, this can be alleviated by adjustment. For the RCS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RCS side adapter before installation. Position: New structure frame. One-position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be alleviated by adjustment. RCS RCS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types. ・Side adapter for RCS ・Stainless steel side adapter set for RCS SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / Early SR-2
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . PRO RACER(RACER) SP-G/A SP-# and Racer require the separately sold SP-G offset adapter set (product number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W RS/TS-# series require the RS/TS-G offset adapter set (product number 1700001J). *Normal side adapter (product number 1700000J) cannot be used. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame. Vehicles without side airbags or buckle pretensioners. Please check whether the driver's seat has a buckle pretensioner function. Adapter frame included with base frame.

Images are for illustration purpose only. Actual product may vary.