$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2086.526.2 |
| Compatible Car | SUBARU IMPREZA INCLUDING XV GDA GDB GD2 3 9 GGA GG2 3 9 SPORTS FRAME WITH BUCKLE PRETENSIONER FOR DRIVER'S SEAT |
| Product Description | Model year: 2000-08-2007-05 Special notes: With 6mm spacer inserted, the seat will be 24mm lower than the lowest position of the genuine seat. (When using ST-JJ). *When the spacer is removed and used for competition, the seating position will be 30mm lower than the lowest position of the genuine seat. Seat offset is 25mm toward the door (Recaro moves closer to the door). The amount of sliding backwards is reduced by 10mm compared to the genuine seat. Notes / Interference information: For SR-3, 4, and 5, the backrest side and door armrest interfere with each other by 5-10mm, and the shoulder part and B-pillar interfere with each other by 5-10mm. For SP-# and Racer, the SP-G offset adapter set (product number 1600094J) is required. The shoulder part and B-pillar interfere with each other by 10-15mm. For SP-#N, the shoulder part and B-pillar interfere with each other by 10-15mm. new A-8, A-8: Shoulder and B-pillar interfere by approx. 10-15mm. Style-J, JJ, JC, D, DC: Install with backrest width adjustment at narrowest setting. Sport-J, JJ, JC, D, DC: Backrest side and door armrest interfere by approx. 5-10mm. RS/TS-# series requires RS/TS-G offset adapter set (product number 1700001J). SP-X: Shoulder and B-pillar interfere by approx. 5mm. RMS: Adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) with the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. RCS: Adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) with the separately sold RCS side adapter before installation. Position: New structure frame. One-position type. Armrest: Not mountable Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W RS/TS-# series require the RS/TS-G offset adapter set (product number 1700001J). *Normal side adapter (product number 1700000J) cannot be used. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Driver's seat sports frame with buckle pretensioner. (Passenger seat is the same as for cars without pretensioner) Vehicles without side airbags and with buckle pretensioners. Please check whether the driver's seat has a buckle pretensioner function. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
