$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2087.002.1 |
| Compatible Car | SUBARU STELLA LA150 |
| Product Description | Model year: 2014-12- Special notes: Compared to the lowest position of the genuine seat height adjustment function, it is almost the same as when using the middle position of the Recaro's three-stage adjustment. (By changing the position of the mounting hole, it is possible to adjust it up and down by 13 mm) (When using ST-JJ). The handle offset of the Recaro seat is 4 mm closer to the door than the genuine seat. (The handle offset becomes 0). The forward sliding amount is reduced by about 20 mm compared to the genuine seat. If the Recaro seat is installed only on the left seat, it will strongly interfere with the genuine seat bench seat. When the vehicle with side airbags is released, the genuine seat built-in side airbag function will be lost. At the same time, it is necessary to turn off the airbag warning light. Notes / Interference information: It will strongly interfere with the genuine seat bench seat, so the Recaro seat cannot be installed only on the left seat. When installing an IS-84 series seat (old LX, ERGO) on the left seat, the belt buckle and recliner dial cover will slightly interfere, so it is necessary to attach the attached felt. Please install the RMS after adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter. If there is any interference with the interior, it can be alleviated by adjustment. Please install the RCS after adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: Not compatible Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. It interferes strongly with the genuine bench seat, so the Recaro seat cannot be installed on the left seat only. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
