RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR DAIHATSU TANTO LA600S DRIVER'S SEAT 2087.005.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2087.005.2

DAIHATSU TANTO LA600S DRIVER'S SEAT

Model year: 2013-10-2019-07
Special notes: For vehicles with side airbags built into the factory seats, the side airbags built into the factory seats will no longer function. In addition, the airbag warning light will need to be turned off. The seating position is approximately 13mm lower than the factory seats when using the center position of the three-stage adjustment. (Adjustable 13mm up and 13mm down). (When using the New LX-F). The steering wheel offset of the Recaro seat is in the center of the steering wheel. The forward slide amount is reduced by approximately 20mm compared to the factory.
Notes / Interference information: For the AM19 series (TREND, STYLE, SPORT) series, the seat backrest side and door have weak interference (4-9mm). For RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter before installing. In addition, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter.
Position: New structure frame. 3 height options available (For some car models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.)
Armrest: Left hand side for right seat can be installed
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 will require the separately sold SP-GN side adapter set . PRO RACER (RACER) SP-G/A You will need to purchase the side adapter set separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. The driver's seat frame (right seat) and passenger seat cannot be installed because they are belt-in seats. No side airbags. 2WD vehicles. 4WD vehicles and vehicles with options have not been confirmed.

Images are for illustration purpose only. Actual product may vary.