RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR DAIHATSU SONICA L405 415 2087.517.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2087.517.1

DAIHATSU SONICA L405 415

Model year: 2006-06-2009-04
Special notes: The seating position is almost the same as the OEM seat (when using ST-JJ). The backward sliding amount is reduced by about 20mm compared to the OEM.
Cautions / Interference information: For LX (including Ergomed series), LS, and LT, remove the door-side recliner dial and replace it with the rubber cap . For LX (including Ergomed series) and LS with the round recliner dial, remove the door-side recliner dial. For SR-3, 4, and 5, remove the door-side recliner dial and replace it with the rubber cap . There is about 5-10mm interference between the backrest side and the door armrest, and about 5-10mm interference between the shoulder part and the B-pillar. For Style-J, JJ, JC, D, and DC, install with the backrest width adjustment set to the narrowest setting. For Sport-J, JJ, JC, D, and DC, the backrest side and door armrest interfere by approximately 5 to 10 mm, and the shoulder part and B-pillar interfere by approximately 5 to 10 mm. For SR-6 and 11, the shoulder part and B-pillar interfere by approximately 5 to 10 mm. For RCS, adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RCS side adapter before installation.
Position: New structure frame. One position type.
Armrest: Cannot be installed
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Remove the recliner dial to avoid (reduce) interference with the vehicle, and install the rubber cap (sold separately) after removing the recliner dial. Classic LX Pepita / Classic LX Spektrum Remove the recliner dial to avoid (reduce) interference with the vehicle, and attach the rubber cap (sold separately) after removing the recliner dial. LX-F (IS-05 base)
LS / LS-# / LT-# Remove the recliner dial to avoid (reduce) interference with the vehicle, and attach the rubber cap (sold separately) after removing the recliner dial. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the RCS side adapter sold separately before installing. *Please choose from the following two types.・Side adapter for RCS ・Stainless steel side adapter set for RCS Late model SR-2 / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro Remove the recliner dial to avoid (reduce) interference with the vehicle, and after removing the recliner dial, attach the rubber cap (sold separately). AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Compatibility with cold weather models and vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.