RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR MAZDA FLAIR CROSSOVER MS31S MS41S 2088.001.1

$268.06 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL LEFT SEAT
Product Number
2088.001.1
Compatible Car
MAZDA FLAIR CROSSOVER MS31S MS41S
Product Description
Model year: 2014-01-2019-12
Special notes: For vehicles equipped with side airbags, the OEM seat built-in side airbag function will be lost. Airbag warning light must be turned off. Compared to the lowest position of the OEM seat height adjustment function, the seat will be about 5mm lower when using the middle position of the Recaro's 3-stage adjustment. (Can be adjusted up and down by 13mm by changing the position of the mounting hole) (When using ST-JJ). The handle offset of the Recaro seat is the same as the OEM seat. The forward sliding amount is reduced by about 20mm compared to the OEM.
Notes / Interference information: Please adjust the RMS to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter before installing. Also, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.)
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W You will need to purchase the side adapter set separately. SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. For CVT vehicles. (Cannot be installed on 5MT manual transmission vehicles as it will interfere with the center console) Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed.
Notes
Images are for illustration purpose only. Actual product may vary.