$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2088.002.2 |
| Compatible Car | SUZUKI IGNIS FF21S |
| Product Description | Model year: 2016-02- Special notes: The side airbag built into the factory seat will no longer function. For vehicles equipped with side airbags, the airbag warning light must be turned off. Compared to the lowest position of the factory seat height adjustment function, the seat will be approximately 10mm lower when the adapter frame is installed. When the adapter frame is not installed, the seat will be approximately 48mm lower (when using the New LX-F). The handle offset of the Recaro seat is the same as the factory seat. The forward sliding amount is increased by approximately 10mm compared to the factory. It is reduced by 30mm at the rear. When the Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be illuminated. Notes / Interference information: The side of the seat cushion and the center console will interfere with each other forward of the middle position of the slide rail. There is 3-5mm interference on the New LX-F, SR-7F, Sportster, and Cross Sportster. AM19 TREND, SPORT, STYLE, SR-6, SR-7, SR-11, and Orthoped will interfere by 10-15mm. For RMS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter. If there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. One-position type. Armrest: Can be installed on the right hand side of the left seat or the left hand side of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. CVT vehicles. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
