RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR SUZUKI WAGON R SMILE MX91S PASSENGER SEAT 2088.003.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2088.003.1

SUZUKI WAGON R SMILE MX91S PASSENGER SEAT

Model year: 2021-09-
Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. The seating position is almost the same as when the lowest position of the 3-stage height adjustment function of the factory seat is used (adjustable up 13mm, 26mm). (When using New LX-F). The steering wheel offset of the Recaro seat is about 12mm toward the console side (about 4mm improved toward the steering wheel center than the factory seat). The slide amount is reduced by 20mm compared to the factory.
Notes / Interference information: For RS/TS-# series, please install with the RS/TS-G offset adapter set . For RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter before installing. In addition, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. For SR6/7/7F/11, the shoulder part and the vehicle side assist grip will interfere with each other by up to 5mm depending on the slide position and the angle of the backrest. The armrest can only be installed on either the driver's side or the passenger's side.
Position: New structure frame. 3 height options available (For some car models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.)
Armrest: Right hand side for left seat can be installed
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . PRO RACER (RACER) SP-G/A side adapter set must be prepared separately. TS-G / RS-G / TS-W / RS-W RS/TS-# series require the RS/TS-G offset adapter set . *Normal side adapter (product number 1700000J) cannot be used. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.