RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR SUZUKI JIMNY JB64W 2088.005.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2088.005.2

SUZUKI JIMNY JB64W

Model year: 2018-07-
Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. The seating position is 6mm lower when using the center position of the 3-step adjustment compared to the lowest position of the factory seat height adjustment function (adjustable 13mm up and 13mm down). (When using New LX-F). The handle offset of the Recaro seat is the same as the factory seat. The slide amount is 20mm shorter than the factory.
Notes / Interference information: SP-# and Racer require the SP-G offset adapter set . In addition, for vehicles with heaters, the belt buckle wiring and heater wiring are gathered into one coupler, so please branch them out and wire them. For RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the RMS side adapter sold separately. In addition, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. 3-stage height selection available (For some models, the legs of the slide rail need to be cut depending on the installation position, so please do a trial fit before installation.)
Armrest: Can be installed for the right hand on the left seat, or the left hand on the right seat
Compatible seats: LX-F (IS-05 base)
Pro Racer RMS Please adjust the RMS to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter before installing. In addition, if there is interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RCS side adapter before installing. *Please choose from the following two types.・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . PRO RACER (RACER) SP-G/A SP-# and Racer require the separately sold SP-G offset adapter set . AM19 TREND-JS
AM19 SPORT-JS
TS-G / RS-G / TS-W / RS-W You will need to purchase the side adapter set separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.