$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2088.015.2 |
| Compatible Car | SUZUKI JIMNY WIDE JB33W 43W |
| Product Description | Model year: 1998-01-2001-12 Special notes: The seating position is almost the same as the genuine seat (when using ST-JJ center hole). Notes / Interference information: For LX (including Ergomed), LS, and LT, the backrest side and door armrest interfere by about 5 to 10 mm. For New Ortho (sold until October 2010), the backrest side and door armrest interfere by about 5 to 10 mm when installed with the backrest width adjustment set to the narrowest position. Similarly, for New Ortho sold after November 2010, the width adjustment function is not a dial type but an electric type, but the backrest side and door armrest interfere by about 5 to 10 mm. For SR-1, 2, 3, 4, and 5, the backrest side and door armrest interfere by about 25 to 30 mm, the seat cushion side and door interfere by about 10 to 15 mm, and for MT cars, the seat cushion side and shift lever interfere greatly, making it difficult to shift into gear. For the A-8, the backrest side and door armrest interfere by about 5 to 10 mm, the seat cushion side and door interfere by about 10 to 15 mm, and for MT vehicles, the seat cushion side and shift lever interfere greatly, making it difficult to put gears in. For the New A-8, the backrest side and door armrest interfere by about 5 to 10 mm, and for MT vehicles, the seat cushion side and shift lever interfere greatly, making it difficult to put gears in. For Style-J, JJ, JC, D, and DC, the backrest side is installed with the narrowest width adjustment, and the backrest side and door armrest interfere by about 10 to 15 mm (the air lumbar support pump interferes with the door, making it difficult to use). For Style-JS, the backrest side is installed with the narrowest width adjustment. For Sport-JS, the backrest side and door armrest interfere by a few mm, and for MT vehicles, the seat cushion side and shift lever interfere greatly, making it difficult to put gears in. For RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RMS side adapter before installation. Also, if there is any interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. Position: New structure frame. English: Choose from 3 heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position, so please test fit before installation.) Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS For the RMS, please adjust to the optimal position (front/back height, left/right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter Rally Special / First generation SR / SR-2 early model Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 STYLE-D/DC TS-G / RS-G / TS-W / RS-W side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. The shape of this product has been changed since July 13, 2011. Thank you for your understanding. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
