$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2088.039.1 |
| Compatible Car | SUZUKI WAGON R MC11 12 21 22S |
| Product Description | Model year: 1998-10-2003-08 Special notes: The seating position is approximately 25mm lower than the original seat (when using the ST-JJ center hole). The storage compartment under the driver's seat cannot be relocated. For manual transmission vehicles, the shift lever interferes with the side of the seat cushion, making shifting difficult. Notes / Interference information: The seating position is higher for CS, CSE, CT, and C-clutch because a spacer is used. For SR-1, 2, 3, 4, and 5, the backrest side interferes with the door armrest by approximately 5 to 10 mm. For RMS, please adjust the position to the optimum position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RMS side adapter. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust the position to the optimum position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RCS side adapter. Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Cannot be installed Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE CT C-Classic Pro Racer RMS RMS can be installed using the separately sold RMS side adapter (product number 1700002J). Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Rally Special / First generation SR / Early SR-2 Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set AM19 STYLE-JS AM19 SPORT-JS TS-G / RS-G / TS-W / RS-W Side Adapter Set (Product No. 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Including column shift vehicles and vehicles without side airbags |
| Notes | Images are for illustration purpose only. Actual product may vary. |
