$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2088.538.2 |
| Compatible Car | SUZUKI SX4 YA YB |
| Product Description | Model year: 2006-07-2014-11 Special notes: For vehicles with side airbags, the airbag warning light must be turned off. The seating position is almost the same as the OEM seat (when using ST-JJ). The seat offset is about 10mm on the door side (the Recaro moves closer to the door). The forward sliding amount is reduced by about 20mm compared to the OEM. Notes / Interference information: For LX (including Ergomed series), LS, LT, SR-1, 2, 3, 4, 5, and new A-8, the recliner dial on the center console side must be removed and replaced with a rubber cap (product number 1600091J). For LX (including Ergomed series) and LS with a round recliner dial, remove the recliner dial on the center console side. For CS, CSE, CT, and C-class seats, the seating position will be higher due to the spacer used. For RS/TS-# series, the offset of the handlebars can be adjusted in 5mm increments from 5mm to a maximum of 15mm by using the offset adapter set for RS/TS-G (product number 1700001J). (When installing, please consult with your dealer regarding interference with the console side (shift, etc.).) For RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before mounting. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before mounting. Position: New structure frame. One-position type. Armrest: Can be installed for the right hand on the left seat, and for the left hand on the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / ErgomedC / ErgomedD / ErgomedE / ErgomedLD / ErgomedMV (IS-84 base) Remove the recliner dial to avoid (reduce) interference with the vehicle, remove the recliner dial and then attach the rubber cap (sold separately). Classic LX Pepita / Classic LX Spektrum Remove the recliner dial to avoid (reduce) interference with the vehicle, remove the recliner dial and then attach the rubber cap (sold separately). LX-F (IS-05 base) LS / LS-# / LT-# Remove the recliner dial to avoid (reduce) interference with the vehicle, remove the recliner dial and then attach the rubber cap (sold separately). CS / CR / CG / Conformed CSE CT C-Classic Pro Racer RMS RMS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter RCS RCS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set SR-S SR-C/ SR-7F |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with cold weather models and vehicles equipped with optional items has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
