RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR SUZUKI SWIFT ZC ZD 11 21 31 71 SPORTS FRAME 2088.539.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2088.539.2

SUZUKI SWIFT ZC ZD 11 21 31 71 SPORTS FRAME

Model year: 2004-11-2010-07
Special notes: The seating position is approximately 20mm lower than the OEM seat. (ST-JJ, when using 13mm spacer). The forward sliding distance is approximately 20mm less than the OEM seat.
Notes / Interference information: The seating position is higher for CS, CSE, CT, and C-clutch due to the use of spacers. For CSE, CT, and C-clutch, the seat cushion side and center console interfere with each other by approximately 10-15mm. For RMS, please adjust to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RCS side adapter.
Position: New structure frame. One-position type.
Armrest: Can be installed on the right hand side of the left seat, or the left hand side of the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / ErgomedC / ErgomedD / ErgomedE / ErgomedLD / ErgomedMV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
CT
C-Classic
Pro Racer RMS For the RMS, please adjust to the optimal position (front to back height, left to right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is any interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / SR-2 early model
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). PRO RACER (RACER) SP-G/A side adapter set (product number 1700000J) must be purchased separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame. 2WD and 4WD vehicles. Side airbag canceller included.

Images are for illustration purpose only. Actual product may vary.