RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR SUZUKI SWIFT ZC ZD 11 21 31 71 2088.544.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2088.544.2

SUZUKI SWIFT ZC ZD 11 21 31 71

Model year: 2004-11-2010-07
Special notes: The seating position is almost the same as the OEM seat when using the center position of the 3-stage adjustment (when using ST-JJ center hole). The seat side position is 4mm closer to the door than the OEM seat. The front slide position is 15mm forward compared to the OEM.
Notes / Interference information: At the front position of the seat slide, the seat cushion and center console interfere (for the right seat, LX, LS, LT, ERGOMED, STYLE, SPORT, TREND, SR series, A8 series, Orthoped, interfere by a few mm, and SR series interfere by about 10-15 mm. For the left seat, SR series interfere by a few mm). The CS uses a spacer, so the seating position is higher by the amount of the spacer. For the RMS, please adjust to the optimal position (front-rear height, left-right offset 0/5/10 mm) using the RMS side adapter sold separately. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter.
Position: New structure frame. Choose from 3 height levels (For some car models, the legs of the slide rail may need to be cut depending on the installation position, so please test fit before installation.)
Armrest: Cannot be installed
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
Pro Racer RMS For the RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is any interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / SR-2 early model
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold side adapter set (product number 1700000J). SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. 2WD and 4WD vehicles. Side airbag canceller included.

Images are for illustration purpose only. Actual product may vary.