$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 81.094.1 |
| Compatible Car | NISSAN FAIRLADY Z ES GS130 |
| Product Description | Model year: 1978-08-1983-08 Notes / Interference information: For LX (including Ergomed series), LS, the backrest side and door armrest interfere greatly. For SR-1, 2, 3, 4, and 5, the shoulder part interferes greatly with the B-pillar, and the backrest side and door armrest interfere greatly. For SP-#, the SP-G offset adapter set (product number 1600094J) is required. For RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. Position: 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: Not available Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum Pro Racer RMS RMS should be adjusted to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter Rally Special / First generation SR / Early SR-2 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G Offset Adapter Set (product number 1600094J). TS-G / RS-G / TS-W / RS-W Side Adapter Set (product number 1700000J) must be purchased separately. |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
