$145.70 SGD $155.30 SGD
| /
| Brand | KYO-EI |
| Product Number | 4120W1 |
| Product Description | Screw size Thread size: M12 x P1.5 HOLE: 4 PCD: 114.3 Thickness mm Thickness: 20 hub bolts height (Hub bolts height): 27mm inside diameter (Inner . dia) Φ: 73mm outside diameter (outer dia) Φ: 145mm JAN code: 4965581 800400 |
| Remarks | ■ genuine and commercially available aluminum wheels with bolt-on mounting, grade up to the wide tread. ■ precise design, the original production of thorough quality control (MADE IN JAPAN) is a high-quality product. ■ hub bolts are adopted using a chromium-molybdenum steel, hardened, high-strength, high durability of the bolt. ■ become the body and Tsuraichi, contribute to the coolness of the appearance. With the widening of the tread, improvement of turning performance. ■ prevent loosening of the spacer in a dedicated nut (for 11~15mm). It can withstand hard sports driving, high reliability. ■ Number of Holes HOLE: 5H · 4H ■ PCD: 100 · 114.3 ■ Thickness Thickness: 11/15/20/25 / 30mm ■ outside diameter outer dia:. 145mm ■ SIZE: M12 × P1.5 / M12 × P1.25 ■ material material: aluminum / bolt (SCM435 chromoly steel) ● 2-sheet set (2pcs sET) accessories / dedicated nut-only ● adapter ※ dedicated hub ring, sold separately. warning attached non models ● 1 number, 4 number, vehicle type ● mounting surface 8 number is not flat, for special vehicles other than drum brake vehicle ● the is, please contact us. Notes of when wide tread spacer mounted ※ Please do not other than domestic cars is mounting. ● If you have received a strong shock to the tire wheel, takes excessive force to the wide tread spacer, there is a possibility to cause damage as it is to use, because it may lead to an accident, the product should not be used in absolute . ● by offset or the like of the spacer thickness and the wheel, there is a If you can not attached to the vehicle (contact to protrude from the fender-tire house). When you purchase, on the confirmation of the current car state, please purchase. ● Since the steel wheel mounting surface is not a plane, do not install. ● Before mounting, be sure to rust the mounting surface and the vehicle body hub side of the back side of the wheel with a wire brush or the like, should be installed from drop the dirt. ● body of the hub bolts, spacer of the hub bolts, do not painted with oil or grease on the mounting nut. There is a possibility that the bolt may be damaged tightened more than necessary. If you ● on the back side of the body of the hub side and the wheel there is a foreign matter and projections, do not install. when fitted with a wide tread spacer to the body hub bolts ●, when the bolt is protruding from the spacer, do not install a wide tread spacer. If you ● on the back side of the mounting wheel of "escape" is, it is possible to attach the wide tread spacer. However, the depth is genuine stud bolt of "escape", if there is no depth to fully escape, do not install a wide tread spacer. If you ● mounting surface is a drum brake vehicle and projections not flat can not be mounted. In addition, the vehicle of steel wheels Do not install absolutely. ● Some of the vehicle, there is a vehicle hub diameter is large, there is a case where the wide tread spacers can not be mounted. When you purchase, please purchase after confirming the vehicle hub diameter and the inner diameter of the wide tread spacer. ● After mounting the wide tread spacer, it is recommended alignment adjustment to prevent uneven wear of the tire. ● If you are installing on a vehicle sliding door, please pay attention to the protrusion of the tire. Sliding door it may not be opened interfere with the tire . ● For 10mm of hub-centric ring mounted, vehicle hub height 12mm or more vehicles, since there is a possibility that can not be worn by the shape of the wheel mounting surface, please note. ● attachment, for the failure and damage caused by errors of handling, does not guarantee at all. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
