DIXCEL BRAKE PAD TYPE R01 REAR [COMPATIBILITY LIST IN DESC.] FOR 375131-R01

DIXCEL

BRAKE PAD TYPE R01 REAR [COMPATIBILITY LIST IN DESC.]

375131-R01

Ultra-low heat conductive racing padCharacteristic low thermal conductivity reduces heat damage to brake componentsFlat μ characteristics that allow the driver to freely control the pedal pressureDespite being made of racing material, it has very mild disc rotor aggression.Using a manufacturing process similar to that of sintered alloys, the friction material is molded at a high density (realizing high heat resistance and high strength). About bedding:Race pads need to be heated and fitted before the race in order to ensure they perform as they should. This process is called "bedding."Bedding method:While avoiding hard braking, raise the temperature of the disc rotor to around 500°C to make the brake pads and disc rotor contact each other.Once the contact is made, stop driving and let the disc rotor cool naturally to below 100°C. This completes the brake pad film on the disc rotor and the work.
Compatible Vehicles:
NISSAN NOTE E12 modified 14/10 ~
SUZUKI ESCUDO YD21S YE21S YEA1S 15/10 ~
SUZUKI SWIFT ZC72S 10/09 ~ 17/01
SUZUKI SWIFT ZC72S 10/09 ~
SUZUKI SWIFT ZD72S 10/09 ~ 17/01
SUZUKI SWIFT ZC32S 11/12 ~ 17/09
SUZUKI SWIFT ZC13S ZC53S ZD53S 17/01 ~
SUZUKI SWIFT ZC43S 17/01 ~
SUZUKI SWIFT ZC83S 17/01 ~
SUZUKI SWIFT ZD83S 17/01 ~
SUZUKI SWIFT ZC33S 17/09 ~
SUZUKI SX4 S-CROSS SX4 YA22S YB22S 15/02 ~Some part numbers have a "ceramic coating" on the back plate to reduce heat conduction to the caliper piston.These brake pads are designed for full-scale racing use. The characteristics of the brake pads are affected by the machine, settings, brake calipers and other brake systems, the circuit, and the driver. Please consult with our staff regarding brake pad selection.As this is made to order, delivery takes about one month. If the part you are looking for is not listed in the compatibility chart, please contact us.

*This type is designed for heavy use on the circuit. A wear sensor is not included as the sensor function will not work due to damage from high heat.Using it on the street may cause problems such as abnormal wear of the brake pads/disc rotors, squealing, dust, rust caused by dust, etc. Even when driving on a circuit, using it outside the appropriate temperature range will not only prevent it from performing as it should, but may also cause the problems mentioned above, so please be careful.

Images are for illustration purpose only. Actual product may vary.