$236.10 SGD
| /
| Brand | J'S RACING |
| Series Name | FF ROLL CENTER ADJUSTER |
| Product Number | FCJ-T1 |
| Compatible Car | HONDA INTEGRA DA6 |
| Compatible Engine | B16A |
| Product Description | Material: Tylot end S45C Tylot end ball stud SCM435 Ball joint S45C Ball stud SCM435 HB195-260 Swing angle all around 39 ° 20mm extension type Ideal for modifying the roll center of DA6 Introducing special parts that can be changed to a unique geometry. The height of the DA6 has dropped, the lower arm angle has become worse, and the position of the roll center has dropped too much. When the center of gravity of the car and the roll center are separated, the amount of roll increases and the cornering force is sacrificed. Also, the suspension stroke is reduced and the limit is lowered. By installing the J'S RACING roll center adjuster, the lowered roll center can be corrected to the ideal position (the distance between the center of gravity of the vehicle and the roll center is corrected to a short position), which is ideal. Achieve suspension geometry. [Mounting effect] ★ Reduced roll amount ★ Improved tire contact feeling ★ Improved steering response ★ Increased cornering force Super Special parts born from endurance and time attack participation know-how You can use it regardless of the stage from street to circuit. In the lower postion of DA6 doesn't have good condition with the lower arms. It will give high speed cornering to your car. It cause from collection with geometory of lower arm angle. J'S RACING repeated TEST many times to set the optimum 20mm thickness for DA6 roll center correction. Please use for vehicles with a height reduction of 40 mm or more. * It is not recommended to install it on vehicles with a normal vehicle height up to 40 mm. |
| Remarks | Engine: B16A Press work is required for mounting. We recommend that you replace it at a professional shop. It is necessary to adjust the vehicle height and alignment after replacement. Please follow the specified torque and install correctly. * Please check the tightening of bolts and nuts regularly after mounting. Please do this every time, especially before driving on the circuit. Need to do the alignment after install this parts. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
