$239.58 SGD $31,581.00 SGD
| /
| Brand | KAWAI WORKS |
| Product Number | KAWAI-WORKS-15781 |
| Compatible Car | NISSAN CARAVAN.NV350 E25 01.04~ 12.05 |
| Product Description | For RECARO L LS/SR3/4/5&SR6/7/11 Mounting conditions apply Please purchase after referring to seat selection and mounting precautions. ◎The passenger seat of the front three-seat car cannot be installed. Please note: L/LX series, SR-VF/LX-VF, SR2/3/4/5 series, and Ergomed series driver's seat SR3 are raised only about 5-10mm (hip point) from the normal seat. (Depending on the seat, there may be slight differences in the fabric and structure.) As shown in the image, on the console side, when the dial is removed, the clearance with the side brake cover is 1 to 2 mm, so there is interference due to errors in mounting the vehicle and rail products. You may have a vehicle. In that case, the shaft will be cut and machined. The image is the relationship with the door side pillar, there is enough clearance without problems. On the SR series, the door armrest and side support interfere a little, but if the door is closed firmly, there should be no problem. There is no interference in the LX series. If you choose the L/LX series, please choose one with a small seat angle. Genuine Recaro models such as Lancer Evo 1-4, Integra DC5, and Civic EK9 have dials on one side and no shaft on the other. (In the case of installing in a caravan, the driver/passenger seat will be equipped with a dial on the console side, so be careful especially if you are purchasing a single leg. Make sure to adjust the dial on the door side without interfering with the center console.) is ideal. The passenger seat is narrower than the driver's seat, and unfortunately the shaft completely interferes with the console wall even when the dial is removed. Also, if you move it closer to the door side, it will completely interfere with the armrest and the door will not close. Is it necessary to modify the shaft? Requires seat choice for single-sided dials. In addition, the regular product does not have a one-sided dial. Please look for genuine Recaro such as Honda. SR6/7/11 It is about 15mm to 20mm higher than the genuine seat. As you can see in the image, the dial part is inside the LX and SR3 series, so it can be installed without interference with the console.There is also clearance on the shoulder. There is some interference with the door armrest, but I don't think there will be any problems.The clearance between the front passenger seat and the console is 0mm with the dial attached, so it slides with the console slightly rubbed, so protect it with cushion tape. It is recommended that The AM19 series (SP-JJ), Sportster, and D series (electric) types cannot be installed because the seat surface is too high and hinders driving. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
