$215.82 SGD $28,314.00 SGD
| /
| Brand | KAWAI WORKS |
| Product Number | KAWAI-WORKS-15784 |
| Compatible Car | NISSAN CARAVAN.NV350 E26 12.06~ 21.10 (NV350) (DIESEL UNTIL 22.2) |
| Product Description | For RECARO L LS/SR3/4/5&SR6/7/11 Mounting conditions apply Please refer to the following for notes etc. L/LX system SR2/3/4/5/Ergomed system driver's seat However, it will not pass the vehicle inspection. (Depending on the seat, there may be slight differences in the fabric and structure.) As shown in the image, the clearance between the dial and the console is about 5mm, so there may be interference due to vehicle installation errors or rail product errors. In that case, you need to change the dial to a thin dial or remove it. There is no problem with the relationship with the door side pillar, and the clearance is barely there. On the SR series, the door armrest and side support interfere a little, but if the door is closed firmly, there should be no problem. There is no interference in the LX series. The clearance between the dial and the pillar is about 3mm, so there is a risk of interference. In that case, you need to change the dial to a thin dial or remove it. SR6/7/11 It is about 15mm to 20mm higher than the genuine seat. As you can see in the image, the dial part is inside the LX and SR3 series, so it can be installed without interference from the console. The shoulder also has clearance. There is some interference with the door armrest, but it seems that there is no problem. Depending on the reclining angle, it interferes with the swelling of the rear air conditioner in the ceiling. It does not interfere with driving, but cannot be knocked down during breaks. When choosing a seat, choose a seat with a small seat angle. Due to the structure of the vehicle, a seat with a high front part will have tight thighs. In addition, it is difficult to get on and off a seat with high side support, so there is a risk of falling when getting on and off. LX-VF and the current SR7-F are ideal. The AM19 series (SP-JJ), Sportster, and D series (electric) types cannot be installed because the seat surface is too high and hinders driving. It is also possible to manufacture for Sparco Reclining Brit Euro/Deigo. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
