$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 1080.577.1 |
| Compatible Car | TOYOTA ALLION T240 |
| Product Description | Model year: 2001-12-2007-05 Special notes: The seating position is almost the same as the lowest position of the genuine seat (when using the center hole of ST-JJ). If installed on the left seat, the seat belt warning light will not function (the genuine navigation unit under the left seat can be used as is). Notes / Interference information: For CSE, D, DS, DSE, New Ortho, Trend, Style, Sport-J, JJ, JC, D, and DC, the backrest side and door armrest interfere by about 10 mm, and the seat cushion side and center console interfere by a few mm. For SR-1 and 2, the shoulder part interferes with the B-pillar by a few mm. For SP-#, the SP-G offset adapter set (product number 1600094J) is required. For RMS, please adjust the position to the optimum position (front/rear height, left/right offset 0/5/10 mm) using the side adapter for RMS sold separately. If there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adaptor. Position: 3 height settings available (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: Cannot be installed Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE D / DH / DV DS / DS-H / DS-V / ES-V/DSE Pro Racer RMS Please install the RMS by adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter (product number 1700002J). If there is any interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent) RCS Please install the RCS by adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Rally Special / First generation SR / Early SR-2 Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. 2WD vehicles |
| Notes | Images are for illustration purpose only. Actual product may vary. |
