RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR DAIHATSU MIRA MIRA GINO MIRA AVY L700 710 3-DOOR 1087.511.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

1087.511.1

DAIHATSU MIRA MIRA GINO MIRA AVY L700 710 3-DOOR

Model year: 1998-10-2000-09

Notes / Interference information: LX (including Ergomed series), LS, LT, New Ortho, the backrest side and door armrest interfere by about 5 to 10 mm. New LX-F armrest specifications cannot be installed. New A-8, A-8, shoulder part interferes with B-pillar and window by about 5 to 10 mm. SP-#N, shoulder part interferes with B-pillar by about 10 mm. Style, Sport J, JJ, JC, D, DC, backrest side and door armrest interfere by about 10 to 20 mm. SR-1, 2, 3, 4, 5, shoulder part interferes with B-pillar and window by about 5 to 10 mm, backrest side and door armrest interfere by about 10 to 20 mm. SP-# requires SP-G offset adapter set . For the RMS, please adjust the position to the optimum (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter. For the RCS, please adjust the position to the optimum (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter.
Position: 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.)
Armrest: #N/A
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS can be installed by adjusting the position to the optimum position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / SR-2 early model
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W You will need to purchase the side adapter set (product number 1700000J) separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. 3-door (excluding cars with armrest console)

Images are for illustration purpose only. Actual product may vary.