$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2011.004.1 |
| Compatible Car | VOLKSWAGEN GOLF 7 AUC## AUD## |
| Product Description | Model year: 2013-04- Special notes: The side airbag function built into the factory seat will be lost. For vehicles equipped with side airbags, the airbag warning light must be turned off. Notes / Interference information: The RMS can be adjusted to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter. For the RCS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installing. For the following seats, the seat cushion side and center console will interfere in front of the seat slide (interference near the frontmost position). For Sportster/Cross Sportster, SR-6/7/11, the maximum interference is 10mm from the 3rd notch from the frontmost position of the slide. When installing IS84 series seats (old LX series, Ergomed, etc.), you can avoid interference with the center console by replacing the recliner dial on the console side with a thin dial (3,300 yen Position: New structural frame. Choose from 3 height settings (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Cannot be installed Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle Classic LX Pepita / Classic LX Spektrum Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle LX-F (IS-05 base) Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle LS / LS-# / LT-# Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle Pro Racer RMS Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter (part number 1700002J). If there is any interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types. ・RCS side adapter (part number 1700003J) ・RCS stainless steel side adapter set (part number 1700004J) SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 side adapter set (part number 1700000J) must be prepared separately. SP-AN / SP-GN / SP-GN 2 side adapter set (part number 1700000J) must be prepared separately. You will need to purchase the PRO RACER(RACER) SP-G/A side adapter set (product number 1700000J) separately. AM19 TREND-J/JJ/JC AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV You will need to purchase the TS-G / RS-G / TS-W / RS-W side adapter set (product number 1700000J) separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
