RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR VOLKSWAGEN GOLF 6 1KC## 2011.027.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2011.027.2

VOLKSWAGEN GOLF 6 1KC##

Model year: 2009-04-2013-05
Special notes: The side airbag function built into the factory seat will be lost. Airbag warning light must be turned off. The seating position will be 10mm higher than the lowest position of the factory seat (when ST-JJ is equipped with the standard 6mm and 13mm (6mm+7mm) spacers). The seating position will feel low, so please use the included 13mm (6mm+7mm) spacer between the Recaro seat and the seat rail. Seat offset door side approx. 20mm (Recaro moves closer to the door). The forward sliding amount is reduced by approx. 30mm compared to the factory.
Notes / Interference information: SR-1, 2 have approx. 5-10mm interference between the shoulder and B-pillar. SP-# and Racer require the SP-G offset adapter set (product number 1600094J). For RS/TS-# series, the offset of the handlebars can be adjusted in 5mm increments from 5mm to a maximum of 15mm by using the offset adapter set for RS/TS-G (product number 1700001J). (When installing, please consult with your dealer regarding interference with the console side (shift, etc.).) For RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before mounting. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before mounting.
Position: New structure frame. One-position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / SR-2 early model
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). PRO RACER (RACER) SP-G/A SP-#, Racer require the separately sold SP-G offset adapter set (product number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set [Offset priority] Offset adapter set for RS/TS-G The handle offset can be adjusted to 5/10/15mm left and right. (The seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included

Images are for illustration purpose only. Actual product may vary.